TEST EQUIPMENT

Static Locator
Static Field Meter
Surface Resistivity Meters
Concentric Ring Probe
Calibration Monitor
Chair Check
Ionizer Performance Analyzer

In order to have an effective ESD Control Program continuous testing and measuring is essential.

Static Locator - ACL 300B

• measures instantly and reliably whether static charges are present, how much and in which polarity
• measures charges from 0-30kV
• accuracy +/- 10%
• designed for close in repetitive readings
• uses a 9V alkaline battery
• has a battery test feature
• size 11.1 x 6.7 x 3.3 cm
• supplied with a carrying case
• CE compliant.

Static Field Meter - FMX 00L

• makes accurate measurements of electrostatic fields
• can be used in areas using air ionization, however accuracy is not guaranteed
• HOLD measurement mode allows measurements to be made in places that would be difficult to reach or see with other instruments
• digital display and bar graph 0-20kV
• accuracy +/- 10%
• range light assures accurate and repeatable measurements
• conductive case and ground snap facilitate grounding for increased accuracy
• uses a 9V alkaline battery
• has a battery test feature
• size 11.5 x 6.5 x 2.5 cm
• additional plate for measuring the ion balance
• supplied with a carrying case
• CE compliant

Surface Resistivity Meters

• BB1950
• measures surface resistivity and resitance to ground
• uses parallel metal electrodes
• ranges 10^{3 -} 10¹² ohms /sq
• accuracy +/- 10%
• uses a 9V alkaline battery
• size 13 x 7x 2.5 cm
• supplied with a carrying bag
• CE compliant

• BB1310
• measures surface resistivity, resistance to ground and point to point resistance
• comes with two 2.5kg electrodes and probe with parallel electrodes
• ranges 10^{3 -} 10¹³ ohms /sq
• analog display
• LEDs for quick reference of conductive, dissipative and insulative
• automatic ranging of test voltage : 10V for conductive surfaces, 100V for dissipative surfaces
• override switch can be used for measuring at 10V only
• accuracy +/- 10%
• uses a 9V alkaline battery
• indicator light for low battery
• size 10.2 x 19 x 7 cm
• supplied in a conductive case
• complies with IEC 61340-5-1
• CE compliant

Concentric Ring Probe

• measures surface and volume resistivity according to IEC 61340-5-1
• can be used in combination with the Surface Resistivity meter BB1310
• weight 2.5kg
• inside diameter electrode 30mm +/- 0.5mm
• outside diameter electrode 57mm +/- 0.5mm

Calibration Monitor

The Calibration Monitor was designed to monitor the Surface Resistivity Meter BB1310 to be working within the parameters of IEC 61340-5-1

• 4 test positions, low fail, low pass, high pass, high fail
• size 6.8 x 11.5 x 2.5 cm
• CE compliant

Chair Check

• measures surface resistivity from earth to seat, backrest and armrest of an ESD safe chair
• ranges 10^{3 -} 10¹³ ohms /sq
• analog display
• LEDs for quick reference of resistance
• test voltage 10/100V
• accuracy +/- 10%
• uses a 9V alkaline battery
• indicator light for low battery
• size 10.2 x 19 x 7 cm
• supplied in a conductive case
• CE compliant]

Ionizer Performance Analyzer

The Ionizer Performance Analyzer test AC or DC ionizers, laminar flow, overhead or benchtop ionizers or ionized compressed gas systems as simply as pushing a button.

The Ionizer Performance Analyzer performs manual or automatic decay and balance tests for periodic verification of ionization equipment. It then stores the results and averaged decay times for up to ten manual test and up to ten complete automatic test sequences. Temperature and relative humidity are displayed real time and recorded with the test data. 
All instrument functions are controlled by four push buttons.
In DECAY mode a built in high voltage generator charges the plate to over 1.050 V. During the test the plate will discharge toward zero in the presence of ionization. The elapsed time of decay between 1.000V and 100V is displayed.
In the BALANCE mode, isolated plate voltage, test duration and + and - peak voltages are displayed. Self test include battery check and test for functional errors.

• measures voltage, decay time, temperature and humidity
• tests ion balance and decay
• stores test results (max 10x)
• built in charges charges to + or - 1.100V
• accuracy field meter +/- 5%
• trip points 1.000 V and 1.00V
• charge plate 4.3 x 10.1 cm
• capacitance ca. 25pF
• tolerance RH measurement, from 10-90% RH, 25C, +/- 5%
• tolerance temperature measurement +/- 2C
• uses a 9V lithium battery
• size 20.6 x 10.2 x 4.8 cm
• supplied with a carrying bag and grounding cord
• CE compliant